Revision 1 -
Note: this is
an “ongoing” list and will be revised continually. Please note the date to be sure your list is current. This list only covers parts which are
specifically being reproduced for
As much as possible, I try to offer a separate listing
for each item, depending upon its applicability to year and model. If one item fits only a particular year or
series of
Reading the table: Items
which are stocked are listed with an “A”.
Items which are made up on a per-order basis are listed with a “D”
(on-demand). Where the customer must
make some modification (like plating a bronze casting, for example); this is listed in
the description. “NA” means the item had
no separate
Some
A listing here does not constitute an endorsement of a
product. You are encouraged to contact
the seller and ask questions. This list
is maintained by an individual and is not an official project of the
Hudson-Essex-Terraplane Club, Inc. The author is not responsible for incorrect
information.
Please advise me of any changes or additions, at Terraplane@verizon.net .
Hr=Hornet, C=Commodore, T=Terraplane,
P=Pacemaker, W=Wasp, SW=Super Wasp, HS=Hornet Special, E=Essex, H=
ELECTRICAL
AND LIGHTS
|
Part No. |
Description |
Years Applicable |
Vendor Code |
Availability Code |
|
124659 |
Headlamp reflector lower retainer spring (1 per headlamp) |
37 H & T |
1 |
A |
|
|
|
|
|
|
|
|
Steering wheel-mounted light switches (’27-29): see Dashboard, Steering Wheel, Instruments and Control listing. |
|
|
|
|
? |
Taillight Lens (red
plastic) – verify authenticity; may be an Austrailian
version |
28-29 E, 29 H |
13 |
? |
|
? |
Taillight insert ( |
50 Comm |
10 |
? |
|
211087 |
License light housing, cast & plated (housing only, no innards) |
’41-47 all; ’48-49 Super; 50 P |
17 |
A |
|
? |
Hood side light reflectors (metal), hold light sockets (not included); baked-on hi-temp alum. finish (sold in pairs) |
’42-’47 C |
19 |
A |
|
? |
Parking light housings (front) |
52-53 all |
20 |
A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ENGINE,
TRANSMISSION & DRIVE TRAIN
|
Part No. |
Description |
Years Applicable |
Vendor Code |
Availability Code |
|
? |
Heat Shield, all 2 bbl. Carbs. |
37 – 47 all |
2 |
A |
|
? |
’24-28 Essex Distributor counterweights |
24-28 |
5 |
D |
|
? |
Heat Shield for carbs, in stainless stl. (sold in pairs) |
Twin-H setups |
2 |
A |
|
48670 |
Ring & Pinion
gear set, 3.51 ratio (high speed) |
34-39 H & T |
12 |
D |
|
? |
Vacuum tank top
(Stewart), alum. (verify size before ordering; unsure if original size) |
'24-27 E & H |
13 |
? |
|
300088 |
Intake valve guides
of aluminum-silicon-bronze for factory std. valve stem |
48-56 H6 (232, 262,
308) |
16 |
D |
|
300089 |
Exhaust valve guides of aluminum-silicon-bronze for factory std. valve stem |
48-56 H6 (232, 262, 308) |
16 |
D |
|
166200 |
Exhaust valve guides of aluminum-silicon-bronze for factory std. valve stem |
38-47 6-cyl 38-52 8-cyl |
16 |
D |
|
166199 |
Intake valve guides of aluminum-silicon-bronze for factory std. valve stem |
38-47 6-cyl 38-52 8-cyl |
16 |
D |
|
156496 |
Vacuum clutch cylinder rubber boot |
38 – 50 w/ vacuum clutch |
17 |
A |
|
? |
Headers: CNC made, single outlet 3”, tig welded, made in a jig. |
308 & 262 LWB models |
21 |
? |
|
? |
Decals, Twin H-Power air cleaners. |
All Twin H |
2 |
A |
|
? |
Distributor seal |
232, 308 only |
22 |
A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DOORS,
TRUNK LIDS & LATCHES
(EXCLUDING
TRIM, HANDLES, KNOBS AND UPHOLSTERY)
|
Part No. |
Description |
Years Applicable |
Vendor Code |
Availability Code |
|
41600 ( R ) (220538) |
Door striker plates, front or rear doors |
48-53 all exc. Jet |
11 |
A |
|
41650 (L) (220539) |
Door striker plates, front or rear doors |
48-53 all exc. Jet |
11 |
A |
|
NA |
Vent wing gears (front door) – old gear must be removed from regulator and new gear riveted in place. |
48-54 all w/crank type vent windows |
11 |
A |
|
|
|
|
|
|
|
|
|
|
|
|
|
141345 |
Oil wick dovetail door latch guide (cast metal) |
40-47 all |
11 |
A |
|
NA |
Vent window gears, L & R (sold as pair) |
37- Mod. 72, 73 38- Mod. 82, 83 39- Mod. 93 |
18 |
A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
INTERIOR & EXTERIOR TRIM &
BRIGHTWORK
|
Part No. |
Description |
Years Applicable |
Vendor Code |
Availability Code |
|
? |
Hubcap, cast aluminum. (Polished, not plated) |
32 T |
3 |
D |
|
? |
Window winder handle (nickel plated, with knob) plain, pine cone, and rose pattern |
28, 29 H & E |
5 |
D |
|
? |
Door Pull (nickel plated plain, and rose pattern) |
28, 29 H & E |
5 |
D |
|
? |
Robe rail bracket (pine cone pattern nickel plated) |
29 H & E |
5 |
D |
|
? |
Vent lever (nickel plated or plain) |
29 H & E |
5 |
D |
|
? |
Foot rest Holders (rose pattern) nickled |
’29 H Briggs bodies) |
5 |
D |
|
? |
Exterior door handles , rose pattern chromed |
’29 |
5 |
D |
|
? |
Radiator Cap (winged man), nickel plated |
28 E |
5 |
D |
|
? |
Radiator cap, 12-sided (nickel plated) |
29 H & E |
5 |
D |
|
? |
Radiator cap, rose pattern (all chrome) |
29 H custom body |
5 |
D |
|
? |
Window winder with
knob (not plated) |
29 E & H |
13 |
? |
|
? |
Interior door handle
(brass alloy, not plated) |
29 E & H (Aust. only) |
13 |
? |
|
? |
Interior door handle escutcheon (brass alloy, not plated) |
29 E & H (Aust. only) |
13 |
? |
|
? |
Hubcap (wood spoke
wheel) -- unpol. alum. |
29 E |
13 |
? |
|
? |
Hubcap (wood spoke
wheel) -- alum, unpol. |
28 E |
13 |
? |
|
? |
Hubcap (wire wheel)
-- alum. unpol. |
29 E |
13 |
? |
|
Part No. |
Description |
Years Applicable |
Vendor Code |
Availability Code |
|
116796 |
Center bumper bolt,
chromed (covers crank hole) |
’36-39 all |
2 |
A |
|
? |
Gas door guards |
48-53 |
21 |
A |
|
? |
Door handle guards |
48-54 |
21 |
A |
|
? |
Aluminum door sill plates |
’14 4-dr. touring |
17 |
A |
|
|
Aluminum door sill plates |
’28 4-door sedan |
17 |
A |
|
|
Aluminum door sill plates |
’29 2-dr. conv. & roadster |
17 |
A |
|
|
Aluminum door sill plates |
‘29 4 dr sedan 7-pass. 139” WB Biddle and Smart body |
17 |
A |
|
|
Aluminum door sill plates |
‘29 4 dr Club sedan 5-pass. Biddle and Smart |
17 |
A |
|
121902 (R) 121903 (L) |
Aluminum door sill plates |
‘37 2-dr Super Terraplane |
17 |
A |
|
121916 (R) 121917 (L) |
Aluminum door sill plates |
-37 4-dr sedan 76 & 77 series |
17 |
A |
|
|
Aluminum door sill plates |
-38 2-dr Super Terraplane 82 series |
17 |
A |
|
|
Aluminum door sill plates |
‘38 4-dr. sedan series 87 |
17 |
A |
|
|
Aluminum door sill plates |
1946-47 4 door sedan |
17 |
A |
|
Part No. |
Description |
Years Applicable |
Vendor Code |
Availability Code |
|
|
Aluminum door sill
plates |
‘46-47 2 door Conv. and coupe |
17 |
A |
|
|
Aluminum door sill plates |
’46-7 pickup |
17 |
A |
|
|
Aluminum door sill plates |
‘48-53 2 door Conv. and coupe (Comm. & Super) |
17 |
A |
|
|
Aluminum door sill plates |
‘48-53 4 door (Comm. & Super) |
17 |
A |
|
|
Aluminum door sill plates |
‘50-53 2-door Pacemaker and Wasp |
17 |
A |
|
|
Aluminum door sill plates |
‘50-53 4- door Pacemaker and Wasp |
17 |
A |
|
|
Aluminum door sill plates |
1954 2 door Conv. and coupe |
17 |
A |
|
|
Aluminum door sill plates |
’54-62 Metropolitan |
17 |
A |
|
|
Aluminum door sill plates |
’56-7 2-dr. |
17 |
A |
|
|
Hubcaps, wire wheel (aluminum) |
’29 |
25 |
D |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Part No. |
Description |
Years Applicable |
Vendor Code |
Availability Code |
|
? |
Hubcap (wood spoke
wheel) -- alum., unpol. |
30 E |
13 |
? |
|
? |
Radiator cap (brass alloy, unplated)
|
29 E |
13 |
? |
|
108213 |
Crank hole cover (brass alloy, unplated) |
29 E |
13 |
? |
|
? |
Gas cap (brass alloy, unplated) |
29 E |
13 |
? |
|
? |
Front bumper triangular
“ |
Italia |
10 |
? |
|
? |
Grille red plastic “ |
Met |
10 |
? |
|
? |
Plastic “V8” side trim |
55-56 Hr |
10 |
? |
|
? |
Crank hole cover (snaps into housing) – cast, chrome plated |
34 H |
17 |
A |
|
? |
Crank hole cover backing plate (fits on grille) – cast, chrome plated |
34 H |
17 |
A |
|
? |
Crank hole cover lower trim (fits on grille) – cast, chrome plated |
34 H |
17 |
A |
|
240892 |
Hood ornament center casting (chromed) – center part of 3-piece hood trim |
54 W |
17 |
A |
|
? |
Grille, 14 ga. stl., unpainted |
35 T |
15 |
? |
|
? |
Pork chops (cast in red brass, chromed) |
52-53 Hr & C |
2 |
A |
|
? |
Hood ornament (cast in red brass, chromed) |
38 T |
2 |
A |
|
? |
Fender skirt ornament (cast in red brass, chromed) |
’34-35 H |
2 |
A |
|
121174 |
Fender skirt & trunk ornament (cast in red brass, chromed) sold singly or in pairs |
’37 T |
2 |
A |
DASHBOARD, STEERING WHEEL, INSTRUMENTS & CONTROL
|
Part No. |
Description |
Years Applicable |
Vendor Code |
Availability Code |
|
? |
Steering wheel lower hub (solid machined from alum. bar stock; straight sides, not tapered as orig.) |
’28-‘29 |
6 |
D |
|
? |
Top steering wheel components: horn button, light lever, throttle lever, outer ring made from modern, sturdy hard rubber material. |
’28-‘29 |
6 |
A |
|
? |
Top steering wheel components: horn button, light lever, throttle lever, spark advance lever, made from modern, sturdy hard rubber material. |
’28-‘29 |
6 |
A |
|
? |
Steering wheel mount |
28, 29 H & E |
5 |
D |
|
? |
Light switch lever |
’27 H & E, ’27-’29 H & E r.h.d. |
5 |
D |
|
? |
Steering column clamp (nickel plated) |
28, 29 H & E |
5 |
D |
|
? |
Dashboard glass set, printed: speedo, gas, temp, gen, oil (5 pcs.) Note: background color was changed later in 1937; verify color of lettering on glass before buying. |
’37 H & T |
8 |
A |
|
? |
Glass clock face, printed (see note above regarding mid-year change) |
’37 H & T |
8 |
A |
|
? |
Glass instrument face, fuel / temp |
’51-53 H |
8 |
A |
|
? |
Radio dial face, convex plastic, printed. Only one is left in stock. |
‘33 |
8 |
A |
|
? |
Light switch lever,
stainless stl., pol. |
28-30 E; 29 H (r.h.d. only) |
13 |
|
|
? |
Horn button |
47 |
10 |
? |
|
? |
Super Six plastic dash emblem |
47 |
10 |
? |
|
? |
Plastic grille insert (emblem) |
48-49 |
10 |
? |
|
? |
Plastic horn button (steering wheel center), plastic |
48-9 Comm. |
10 |
? |
|
? |
Glove box inserts w/ screws |
33 - 54 |
2 |
? |
|
? |
Clear acrylic glove box panel (replaces glass) |
46-47 |
2 |
A |
|
Part No. |
Description |
Years Applicable |
Vendor Code |
Availability Code |
|
122616-7 (’37); others differ) |
Fender skirts (include rubber edging but no emblems). Requires drilling holes in underside of fender. |
37 & 38 H & T; 30-40 cpe & cv. (all models) |
7 |
A |
|
? |
Fender skirts |
1953 Jet |
9 |
|
|
? |
Fender skirts |
1954 Hornet |
9 |
|
|
? |
Fender skirts |
1948-53 H |
9 |
|
|
? |
Front floorboard patch panel (specify left or right) |
37-38 H (121" or more) |
4 |
D |
|
? |
Front floorboard patch panel (specify left or right) |
39-42 H (121" or more) |
4 |
D |
|
? |
Front floorboard patch panel (specify left or right) |
37-38 T |
4 |
D |
|
? |
Front floorboard patch panel (specify left or right) |
39 H ''112'', 40-42 Traveler |
4 |
D |
|
? |
Front floorboard patch panel (specify left or right) |
39-47 H |
4 |
D |
|
102488 |
Sidemount bracket rubber grommet (at hole in fender or cowl) |
33-36 all w/ sidemounts |
17 |
A |
|
? |
Front floorboard patch panel (specify left or right) |
48-54 all |
21 |
A |
|
? |
Exterior sunvisor brackets w/ hardware |
? |
21 |
A |
|
? |
Runningboards, L & R (16 ga. steel, covered w/ black “Stone Guard” coating) |
41-47 Pickup only |
26 |
A |
|
|
|
|
|
|
UPHOLSTERY
|
Part No. |
Description |
Years Applicable |
Vendor Code |
Availability Code |
|
? |
Upholstery material, striped nylon in several variations (modern mat’l, exact match) |
48-53 |
24 |
A |
|
? |
Upholstery material, checkers (green or blue) – modern mat’l, close match |
53? |
24 |
A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Part No. |
Description |
Years Applicable |
Vendor Code |
Availability Code |
|
150561 |
Front Axle to Frame Arm Grommet (Torque Arm Bushing) 4 per car |
36-39 all, (exc. commercial) |
14 |
D |
|
|
|
|
|
|
|
|
|
|
|